T004 - Access Terminal
The Access terminal connects to a Micronet or Timenet System controller to provide additional clocking points. The terminal is mainly for use as an Access Control terminal but can also be used as a low cost clocking terminal for Time and Attendance or Data Collection.
- Supports Time and Attendance, Data Collection and Access Control operations.
- Swipe magnetic card reader or proximity reader.
- 16 character by 2 line backlit LCD (liquid crystal display).
- 12 key numeric keyboard.
- Two switch inputs and two Relay outputs.
- RS485 network connection for wiring up to 1km.
Ordering Information :
| T004-CARD | Access Terminal with magnetic card swipe reader | |
| T004-PROX | Access Terminal with adapter for proximity reader |
Specifications :
| Dimensions | 150mm(W) x 110mm(H) x 40mm(D) | |||
| Weight | 300g | |||
| Power Supply | 12V DC 200mA | |||
| Connections | Vin, Gnd | Power In | ||
| TX+, TX- | RS485 connection | |||
| Relay 1 | Door Opening relay | |||
| Relay 2 | Alarm relay | |||
| In 1 | Switch closure input | |||
| In 2 | Switch closure input | |||
| Environment | Temperature | 0o - 40oC | ||
| Humidity | 15% - 90% Non-Condensing | |||
| (Optional IP56 sealing) | ||||
| Terminal Network | Maximum of 32 terminals up to 1km apart |